Sea Tel DAC-03, Installation And Operation Manual

Page: 17 / 80

DAC-03 Tracking Antenna Controller Operation
2-7
AZ 123.4
# AGC 1234
Azimuth position/entry mode . True
Azimuth position of the antenna. Display is the
sum of ships heading (HDG) and antenna
relative (REL) position reduced to 0-359.9
degrees. To manually drive the antenna in
azimuth (assure Tracking is OFF):
Sequentially press the UP or DOWN arrow key
to step the antenna up or down in small
individual increments. OR ,
Press & Hold the
UP
or
DOWN
arrow key to
slew the antenna up or down in rapid
increments. OR ,
Key in the desired numeric value of Azimuth
you want to
target the antenna to and press
ENTER . To target a Relative position, key in the
desired numeric value, press NSEW and then
press ENTER .
DishScan tracking signals ( # ) will appear in the
lower left of the display. Periodic 2, 4, 6 or 8 are
normal DishScan tracking signals.
Current IF signal level (AGC) is displayed to
assist you in manually peaking AZ for best signal
level.
EL 056.7
# AGC 1234
Elevation position/entry mode
. Current
Elevation angle of the antenna (0-90.0). To
manually drive the antenna in elevation (assure
Tracking is OFF):
Sequentially press the UP or DOWN arrow key
to step the antenna up or down in small
individual increments.
OR
,
Press & Hold the UP or DOWN arrow key to
slew the antenna up or down in rapid
increments. OR ,
Key in the desired numeric value of elevation
you want to
target the antenna to and press
ENTER .
DishScan tracking signals ( # )will appear in the
lower left of the display. Periodic 2, 4, 6 or 8 are
normal DishScan tracking signals.
Current IF signal level (AGC) is displayed to
assist you in manually peaking EL for best signal
level.