Sea Tel 4009-9 BROADBAND-AT-SEA, Installation Manual, Page: 34 / 153

4009-9 Installation Manual Installation
3-12
3.6.3. System Configuration
Figure 3-1 Series 09 Simplified Block Diagram
3.6.4. Installing the Below Deck Equipment
1. Install the ACU in the front of the standard 19” equipment rack or other suitable location. The
DAC-2202 ACU is one rack unit high.
2. Install the TMS on the rear of the 19” equipment rack or other suitable location that is within 6
feet of the rear panel connections of the ACU. It also is one rack unit height.
3. Install the Base Multiplexer Panel on the rear of the 19” equipment rack or other suitable
location that is within 6 feet of the rear panel connections of the ACU. It is four rack unit height.
4. Install your satellite modem, router, VOIP adapters, telephone equipment, fax machine,
computers and any other BDE that is part of your installation.
3.7. Connecting the Below Decks Equipment
Connect this equipment as shown in the System Block Diagram. Install the equipment in a standard 19 inch
equipment rack or other suitable location. Optional slide rails are available.
3.7.1. Connecting the ADE AC Power Cable
Connect the AC Power cable that supplies power to the ADE to a suitably rated breaker or UPS.