Sea Ray 225 Weekender, Owner'S Manual

Page: 65 / 96

225 Weekender
® 6.5
S
ECTION
6 • E
LECTRICAL
S
YSTEM
F
USE
C
ONDITION
(ATO T
YPE
F
USE
)
(F
IG
. 6.5.1)
GOOD FUSE BLOWN FUSE
4. E
LECTRONIC
I
NTERFACE
M
ODULE
(EIM)
Your boat has an illuminated, waterproof, electronic
switch pad with ISO symbols to control lights, bilge
pump and other accessories. The switch pad (Figure
6.5.2) is connected to the electronic interface module
(EIM) located behind an access panel under the
dash (Figure 6.5.3). The EIM uses automotive type
fuses to protect these accessories. It also has a
fuse condition test button and indicator light for each
accessory circuit.
Remove the cover of the EIM to access the fuses.
REPLACE ONLY WITH A FUSE OF THE SAME
AMPERAGE. The amperage is marked on the side
of the fuse.
F
USE
C
ONDITION
(ATO T
YPE
F
USE
)
(F
IG
. 6.5.3)
POWER
12VDC
RECEPTACLE RUNNING
LIGHTS ALL-ROUND
LIGHTS WATER
PUMP
BILGE
PUMP
DEPTH
SOUNDER
BILGE
BLOWER
FUSE CONDITION
PUSH TO TEST
IGNITION LIGHTS
WIPER
ACCESSORY
HORN
FUSES
INDICATOR
LIGHTS
FUSE CONDITION
(PUSH TO TEST)
12 VOLT DC
CONNECTION
CABLE
CONNECTION TO
ELECTRONIC
SWITCH PAD
BEHIND ACCESS
PANEL
E
LECTRONIC
S
WITCH
P
AD
(F
IG
. 6.5.2)
BILGE
BLOWER
NAVIGATION/
RUNNING LIGHT
HORN
ANCHOR
LIGHT
COCKPIT
LIGHTS
BILGE
PUMP
DEPTH
SOUNDER
WINDSHIELD
WIPER
WATER SYSTEM
(TURNS ON THE
FRESH WATER
PUMP)