5
FastTrack|
SETUP: VALVES & PUMPS
The 385FT has one valve
for each side chamber,
one valve for the
removable floor and a
keel valve under the spray
skirt.
Press and turn the stem
counterclockwise so it can
pop UP. When the stem is
up, the valve is closed and
will hold air.
To let air escape for
deflation, press and turn
the stem clockwise until
locked open.
Two Stage Pump (Bravo
4)
In the double action mode
the pump inflates on the
up and down strokes.
Automatically switches
to single action mode
if inflating beyond 6 psi
(pounds per square inch).
Twist the pressure gauge
into “Inflation” port on the
handle. Twist hose onto
gauge. Inner red numbers
indicate PSI pressure.
The correct adapter for
the valves is pre-installed
in the hose. If adapter is
too tight, stretch red
gasket to soften it.
*If you do not have the electric pump, skip to
page 7
for the
section on ASSEMBLY.
BTP Turbo & BP12
Electric Pumps
(OPTIONAL)
These electric pumps
come with a nylon
shoulder carry bag, 12V
DC power cord, hose and
adapters.
WARNINGS: Keep out
of the reach of children.
Don’t leave running
unattended. Do not use
inflator for more than 20
minutes continuously as
this can cause overheating
and damage.
BP12
The carry bag has
compartments for the
pump, wire & hose.
Protect the inflator
from sand by
keeping it in the bag
provided, if sand gets
in the inflator it could
get jammed.