13
If your Sea Eagle has lost pressure, it does not necessarily mean
it is leaking. If it is inflated during the heat of the day and the
temperature drops during the night it will be softer in the
morning. If launching in very cold water, the air inside may
contract and cause a loss of pressure. Add more air to restore
to full pressure. If temperature is not a factor and your boat is
losing air pressure, it’s time to look for a leak.
Step #1. LOOK
Visually inspect the boat close up and if necessary, flip it over
and closely check the outside. Any large leaks when your boat
looses a considerable amount of air should be clearly visible.
Step #3. TIGHTEN
Check the tightness of the one-way recessed valves as well and
if necessary, tighten them with the valve wrench included in
the repair kit canister.
FastTrack |
TROUBLE SHOOTING
Step #2. LISTEN
If you have a rough idea of where your leak is but can’t see it,
you may want to try listening for it as you may be able to hear
the air escaping and pinpoint the leak.
Step #4. SOAPY WATER TEST
You’ll need a bucket and liquid dish washing soap. Fill the
bucket with clear water, and add a good squirt of soap (couple
of tablespoons) to the water. Inflate the leaking chamber to full
pressure. Spread lots of soapy water on the leaking chamber
with a hand towel or large sponge. Don’t assume the leak is
coming from the valve or seams. The leak may produce
bubbles, make hissing or sputtering noises, or spray water.
Spray bottles are not effective at locating many leaks.
unroll until it is brought to room temperature.
• It can be stored inflated. If hung, support it along its length.
• After storage, inspect for loose items, damage and leaks.
FastTrack|
REPAIRS
Even though Sea Eagles are very rugged and tough, you may
still experience the occasional puncture. Fortunately most
repairs are fairly easy and only take a few minutes. For
extensive repairs, please contact us directly to provide you
with further assistance. The best way to do this is to e-mail us a
digital photo of the area in question along with your hull
identification number to [email protected].
You can also call us directly at 1-800-748-8066 ex. 314 and
ask to speak with Technical Support for further assistance or a
quote for having your boat mailed to our facilities for our
professional repair services.
Sea Eagle repair fees start at $75.00 and does not include
return shipping charges. Please note that Sea Eagle does not
service any other brand other than our own. All items sent to
our repair facilities must have prior authorization in the form of
a Return Authorization Number.
Repair Kit
All Sea Eagles come
standard with a repair
kit which includes PVC
patches and PVC glue.
Repair kits also
include a valve wrench.
PVC Based Glue
To patch your Sea Eagle,
use an adhesive for PVC
boats.
Plumber’s cement, epoxy,
Flex Seal, waterpoofing
sprays and Gorilla Glue do
not work.
Pinholes
Deflate the boat and
thoroughly clean and dry
the area that is to be
repaired. For small
punctures less than 1/8”
apply a small drop of glue
and allow 24 hours to
cure.
For immediate use allow 30
minutes to dry and then
inflate the compartment
only 3/4 full and if
necessary make a more
permanent repair later.