Sea Eagle Boats NeedleNose NN126, Instruction & Owner'S Manual

Page: 8 / 21

7
Remove the cap to access
the valve stem.
Press and turn the stem
counterclockwise so it can
pop UP. When the stem
is up, the valve is closed
and will hold air. To let air
escape for deflation, press
and turn the stem
clockwise until locked
open.
NeedleNose SUP |
INFLATION: Valves & Pump
Check the hose end that
goes in the board’s valve. It
should have hooks to lock
it in the valve opening.
NeedleNose SUP |
INFLATION: Set Up
Locate a relatively clean
area that is free of sharp
objects.
Unpack from the bag and
lay it out flat.
When ready to inflate,
insert the adapter into the
valve, turn it to the right
until it is fully seated and
then begin inflation.
*Valve stem should be in
the
up
position.
The pressure gauge will
not begin to register until
the board begins to get
pressurized. Pump until
the working pressure of
between 12 and 14.5 PSI is
reached. Do not exceed 15
PSI when inflating.
Screw the hose onto the
pump.
Begin In the double action
mode for fast fill.
Switch to single action
when handle becomes too
hard to lift.
Using the Double Action
Hand Pump:
In the double action mode
the pump inflates on the up
and down strokes. In the
single action mode, the
handle comes up more
easily, allowing the user
to push hard on the down
stroke.
If your pump looks different
than this one, please call us or
check the Instructions page of
our website.