background image

9

One-Way Air Valve  

(Found only on Deluxe 

Inflatable Seat - DKS)

 

Tether the valve cap onto 

the base of the seat by 

stretching the retainer ring 

with your fingers to fit over 

the groove in the base. 

Stretch the ring if it is too 

tight. 

Locate red pump hosewith 

smooth gray adapter 

pre-installed in hose.  

Screw hose into pump 

handle and tighten. Only 

the largest adapter is need, 

pointy inserts are not 

needed.

NeedleNose SUP | 

INFLATION:

 Set Up

Locate red pump hosewith 

smooth gray adapter 

pre-installed in hose.  

Screw hose into pump 

handle and tighten. Only 

the largest adapter is need, 

pointy inserts are not 

needed.   

Inflate untile desired  

pressure is reached. 

Your seat will be white.

Kayak Paddle (OPTIONAL) 

The asymmetrical spoon 

blade design of this kayak 

paddle will allow for a 

smooth entry and an even 

pull,  maximizing the power 

from each stroke. They will 

also require less gripping 

force. 

Put the shaft together first. 

Insert the shaft piece with 

the button into the piece 

with three holes. Lock the 

button in the middle hole.

Next, slide the drip guards 

up the shaft to about an 

inch above the button 

hole. Insert the blades into 

the shaft and adjust until 

the  button locks the blade 

in place. 

The additional holes in the 

shaft are for “feathering” 

the blades. Blades can be 

offset 45° from each other. 

This makes paddling into 

a stiff breeze  easier as the 

blade that is not in the 

water will be able to slice 

through the wind with 

little   resistance. 

Deluxe Kayak Seat  

(OPTIONAL)

 

The Deluxe Kayak Seat 

(DKS) has two internal 

bladders, two white 

one-way valves and two 

blue straps with clips for 

securing the seat to the 

D-rings onto the EVA foam 

 Diamond Deck Pad. 

Summary of Contents for NeedleNose NN126






















Reviews: