Sea-doo Speedster 200, Operator'S Manual

Page: 49 / 130

49
32) Jet Pump Water
Intakes
Water is drawn up by the impeller
through these openings, minimizing
entry of foreign objects into the propul-
sion system.
33) Bow Lights
Mandatory red and green lights. See
LIGHT SWITCH
as mentioned earlier in
this section.
34) Removable Stern Light
Mandatory white stern light.
It is recommended to keep it in rear
storage compartment at all times ex-
cept when needed.
To remove from storage cover, pull it
out. Snap in place to store again.
TYPICAL — STERN LIGHT IN STORAGE CLIPS
Installation
– Lift connector cap.
– Insert post in connector hole. En-
sure to align hole keyway with post
screw head.
– Firmly push downward to engage
terminals.
– Push lock ring downward. Turn until
locked. It may be necessary to
slightly turn it to allow its insertion
in the hole.
– Check light operation. See LIGHT
SWITCH as mentioned earlier in
this section.
TYPICAL
1. Lift
2. Align screw in groove
3. Push downward
4. Turn to lock
CAUTION: Ensure dielectric grease
is present in connector area of light
to prevent corrosion.

WARNING
Keep away from intake grates
while engine(s) is/are on. Items
such as long hair, loose clothing or
personal flotation device straps
can become entangled in moving
parts resulting in severe injury or
drowning.
F13L1EY
1
2
3
4
F04L0LY
lmo2005_002a.book Page 49 Tuesday, July 6, 2004 3:44 PM