Sea-doo Seascooter Explorer SD6541 User Manual Download Page 16

This warranty does not cover any product that has been subject to misuse 

negligence or accident, or that has been operated in any way contrary to the 

operating instructions as specified in the User Manual. This warranty does not 

apply to any damage to the product that is the result of improper maintenance 

or to any product that has been altered or modified so as to change its 

intended use. This warranty does not extend to repairs made necessary by 

normal wear

 or by

 the use

 of parts

 or accessories

 which are

 either 

incompatible with the product or adversely affects its operation, performance 

or durability.

In ad

dition, this

 wa

rranty

 does not

 cove

r items

 that 

experience nor

mal wear and tear

.

ALL IMPLIED W

ARRANTIES  ARE LIMITED IN 

THE DURATION 

TO

 THE 

WARRANTY

 PERIOD. AND

 SUCH IMPLIED

 WA

RRANTIES INCLUDING

 

MERCHANTABILITY

, FITNESS

 FOR 

A P

AR

TICULAR PURPOSE,

 OR 

OTHERWISE,

  ARE

 DISCLAIMED IN

 THEIR

 ENTIRETY 

AFTER 

THE 

EX

PI

RA

TI

ON

 O

TH

AP

PR

OP

RI

AT

WA

RR

AN

TY

 P

ER

IO

D.

 

THE DISTRIBUT

OR’S OBLIGA

TION UNDER

 THE

 WARRANTY

 IS 

STRICTLY

  AND

 EXCLUSIVELY

 LIMITED 

TO

 THE

 REPAIR

 OR 

REPLACEMENT OF

 DEFECTIVE P

AR

TS

  AND

 RETURN OF

 THE

 

PRODUCT T

O THE CUST

OMER. THE DISTRIBUT

OR DOES NOT ASSUME 

OR AUTHORIZE

 ANYONE 

TO

 ASSUME 

FOR 

THEM ANY

 OTHER

 

OBLIGATION.

THE DISTRIBUTOR 

ASSUMES NO RESPONSIBILITY FOR INCIDENT

AL, 

CONSEQUENTIAL OR OTHER DAMAGES INCLUDING, BUT

 NOT LIMITED 

TO

 EXPENSE OF RETURNING THE PRODUCT

 T

O THE DISTRIBUT

OR, 

LOSS OF USE OF PRODUCT AND LOSS OF 

TIME OR INCONVENIENCE.

EXCLUSIONS

BATTER

Y . This warranty does not include the battery

CUSTOMER ENQUIRIES

If your

 unit is

 not operating,

 please refer

 to your

 User Manual

 before 

contacting our Customer Service Centre. For any damage or repair work 

required, please

 do not

 return your

 product to

 the store

 where it

 was 

purchased. 

RETURN / REPAIR POLICY

Customers must call our Customer Service Centre and ask for a Return / 

Repair Authorization

 Number before

 sending the

 product to

 the Service

 

Centre. Returned products must be shipped with original packaging including 

the polystyrene packing material and all defective parts. Please contact our 

Customer Service Centre for assistance in handling your case.

For any questions or queries you may have regarding your 

SEA-DOO

®

 SEASCOOTER™, please follow the below steps for 

easy and fast resolution:

- STEP 1-

Please read your User Manual. For a copy of the User Manuals, please visit 

www.seadooseascooter

.com

- STEP 2-

Go to www.seadooseascooter

.com and see our FAQ section to find instant 

answers.

- STEP 3-

Contact one of our Customer Service representatives at the Customer Service 

Centre in your region.

RETURN / REPAIR PROCEDURE

1.  Call the Customer Service Centre for your Return / Repair 

Authorization 

Number. 

2.  Make a copy of your Proof of Purchase (receipt). 

3.  Pack the defective unit in its original packaging including the polystyrene 

foam and include the unit and all defective parts. 

4.  Attach the copy of your Proof of Purchase (receipt) to the outside of the box 

(clearly visible), together with the Return / Repair Authorization Number

.

5.  Ship the package to the Service Centre.

PLEASE NOTE:

 Deliveries that do not have the Proof of Purchase (receipt) 

and Return / Repair Authorization Number attached clearly to the outside of 

the box, will not be accepted by the Service Centre.

UNITED STA

TES 

SEA-DOO

®

 SEASCOOTER™ CUSTOMER SERVICE CENTRE

Phone No.: +1-800-361-2781     Email: [email protected]

CANAD

SEA-DOO

®

 SEASCOOTER™ CUSTOMER SERVICE CENTRE

Phone No.: +1-888-388-8837     Email: [email protected]

WESTERN EUROPE 

SEA-DOO

®

 SEASCOOTER™ CUSTOMER SERVICE CENTRE

Phone No.: +44 (0)1709 515157     Email: [email protected]

EASTERN, SOUTHERN AND CENTRAL EUROPE

SEA-DOO

®

 SEASCOOTER™ CUSTOMER SERVICE CENTRE

Phone No.: +386 5616 50 20     Email: [email protected]

HONG KO

NG 

SEA-DOO

®

 SEASCOOTER™ CUSTOMER SERVICE CENTRE

Phone No.: +852 3516 2388     Email: [email protected]

(For other territories, please visit www.seadooseascooter

.com 

and contact your local distributor)

Summary of Contents for Seascooter Explorer SD6541

















Reviews: