Care And Maintenance
Battery and Catalyzer Care
Please read and understand important Battery Use safety
information on pages 11, 12, 13 and 14.
• The battery supplied with your SEASCOOTER™
EXPLORER should last about 200 cycles or two years
before it should be replaced. Please contact your your
local Customer service centre/ distributor. Using a
battery in excess of these recommendations can result in
excessive off gassing of explosive gas.
• A safety catalyzer, to protect against explosive gas in
normal use, is fitted in the bottom of the battery housing
and should be replaced at the same time as any battery
replacement. (Fig. 15) The catalyzer should be replaced
sooner if it appears to be damaged. Please contact your
your local Customer service centre/ distributor.
• If the catalyzer is wet, it will not function and must be
allowed to dry out before use.
• ALWAYS remove the battery pod from SEASCOOTER™
EXPLORER immediately after use.
• DO NOT STORE BATTERY POD IN SEASCOOTER
18
17
Washing and Care
• Always rinse the SEASCOOTER™ EXPLORER in fresh
water and allow it to dry before storage.
• Whenever possible rinse the SEASCOOTER™
EXPLORER in fresh water immediately after use.
• To clean the SEASCOOTER™ EXPLORER do not use
detergents, only use a damp cloth to wipe the unit clean.
• The Battery Housing interior should be kept dry at all
times.
• If the Battery Housing interior gets wet, see page 22,
Accidental Flooding for procedure.
• Always store your SEASCOOTER™ EXPLORER
vertically when not in use to prevent deformation of the
Propeller Nozzle.
Buying Parts
Additional Battery Pods and Charging Bases can be
purchased separately. Contact your local Customer
service centre/ distributor to purchase them.
Catalyzer
Fig.15
