61
Engine Coolant
Recommended Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.
NOTE:
When available, it is recom-
mended to use biodegradable anti-
freeze compatible with internal com-
bustion aluminum engines. This will
contribute to protect the environment.
Cooling system must be filled with wa-
ter and antifreeze solution (50% water,
50% antifreeze).
BRP sells premixed coolant with freezing
protection up to - 52°C (- 62°F) (P/N 219
700 362).
To prevent antifreeze deterioration, al-
ways use the same brand. Never mix
different brands unless cooling system
is completely flushed and refilled. Refer
to an authorized Sea-Doo sport boat
dealer.
Coolant Level
With boat on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir when
engine is cold.
1. Level between marks when engine is cold
NOTE:
The boat is considered level
when it is in water. When on a trailer,
block the wheels and raise the bow
slightly with the trailer jack (if so
equipped) until the bumper rail is level.
Add coolant to have the level between
marks as required. Use a funnel to
avoid spillage.
Do not overfill.
Properly reinstall and tighten filler cap.
NOTE:
A cooling system that frequent-
ly requires coolant is the indication of
leaks or engine problems. See an au-
thorized Sea-Doo sport boat dealer.
Coolant Replacement
Refer to MAINTENANCE section.
WARNING
Check coolant level with engine
cold. Never add coolant in cool-
ing system when engine is hot.
F18E0NY
1
lmo2005-007a_1.book Page 61 Wednesday, September 1, 2004 3:27 PM
Summary of Contents for Challenger*180
