41
4) Start/Stop Button
Dual function push switch, used to
start as well as to stop engine.
TYPICAL
1. START/STOP button
Starting
Shifter must be in neutral position and
the safety lanyard must be on the
DESS post to allow engine starting.
To start engine, press and hold the
start/stop button. Release immediately
after engine is started.
1. START when engine is NOT running
Stopping
Pressing button when engine is run-
ning will stop the engine.
1. STOP when engine IS running
5) Inlet Clearance System
(ICS) Switch
1. Inlet Clearance System (ICS) switch
WARNING
Engine exhaust fumes contain car-
bon monoxide (CO) which can ac-
cumulate in and around the boat
(under Bimini top, in cockpit, etc.).
CO can be harmful or fatal if in-
haled. Assure there is adequate
ventilation whenever running en-
gine(s).
1
F23L08Y
F04H0AY
1
WARNING
While engine can be stopped by
pressing the stop button, we strong-
ly re co mm en d th e e ng in e b e
stopped by removing the safety lan-
yard. This will install good habits.
WARNING
Directional control is not available
when engine is stopped.
F04H0AY
1
F23L09Y
1
lmo2005-007a_1.book Page 41 Wednesday, September 1, 2004 3:27 PM
Summary of Contents for Challenger*180
