background image

26

For more information on 

Sea-Doo

®

 Seascooter

 Products

(Warranty, Customer Care / Maintenance,

Parts & Battery Purchase)

PLEASE VISIT 

www.seadooseascooter.com

SEA-DOO

®

 and the BRP logo are trademarks 

of Bombardier Recreational Products Inc. or its affiliates, 

used under licence to Stallion (asia) Ltd.

For more information on SEA-DOO

®

 products visit www.sea-doo.com

Technical Specifications

*Normal Use

The definition of normal use is based on the average general time 

of use the user activates the seascooter in the water

Continuous Use

The definition of continuous use is based on a fully charged battery 

were by the seascooter is used continuously in a swimming pool or 

open water without stopping.

L 81 inches x W 42.5 inches x H 25.6 inches

(L 206 x W 108 x H 65 cm)

Inflatable

Dimensions

23.8 inches x 36.2 inches x 21 inches

(60.4 x 92 x 54 cm)

Propulsion

Dimensions

18.3 lbs (8.3 kg) (with rechargeable battery)

1 x 12V / 12Ah rechargeable battery

*Run up to 1.5 hours with normal use

Continuous use up to 30 minutes (high speed)

Up to 2.5 mph (4.0 km/

h)

(at Carrying weight : 60kg / 132lbs)

Drive Unit Weight

8.8 lbs (4.0 kg)

Inflatable Weight
Battery Type

Battery Life /

Fully Charge

Speed

Summary of Contents for Aqua Master SD75004

















Reviews: