Sea-doo 2005 3D RFI Operator'S Manual Download Page 111 | Manualshive

Page: 111 / 123

background image

Three Stars - Ultra Low Emission

The three-star label identifies engines that meet the Air Resources Board’s Per-
sonal Watercraft and Outboard marine engine 2008 exhaust emission standards
or the Sterndrive and Inboard marine engine 2003 exhaust emission standards.
Engines meeting these standards have 65% lower emissions than One Star -
Low Emission engines.

Four Stars - Super Ultra Low Emission

The four-star label identifies engines that meet the Air Resources Board’s Stern-
drive and Inboard marine engine 2009 exhaust emission standards. Personal Wa-
tercraft and Outboard marine engines may also comply with these standards.
Engines meeting these standards have 90% lower emissions than One Star -
Low Emission engines.

For more information:

Cleaner Watercraft – Get the Facts

1 800 END-SMOG

www.arb.ca.gov

YOUR EMISSION CONTROL WARRANTY RIGHTS
AND OBLIGATIONS

The California Air Resources Board and BRP US Inc. (“BRP”)* on behalf of Bom-
bardier Recreational Products Inc. are pleased to explain the emission control
system warranty on your model-year 2005 Sea-Doo 3D RFI personal watercraft
equipped with RFI engine. In California, new personal watercraft engines must
be designed, built and equipped to meet the State’s stringent anti-smog stan-
dards. BRP must warrant the emission control system on your personal wa-
tercraft engine for the periods of time listed below provided there has been no
abuse, neglect or improper maintenance of your personal watercraft engine.

Your emission control system may include parts such as the carburetor or fuel
injection system, the ignition system and catalytic converter. Also included may
be hoses, belts, connectors and other emission-related assemblies.

Where a warrantable condition exists, BRP will repair your personal watercraft
engine at no cost to you including diagnosis, parts and labor provided that such
work is performed by an authorized BRP dealer.

Manufacturer’s Limited Warranty Coverage

This emission warranty covers model year 2005 Sea-Doo 3D RFI personal wa-
tercraft certified and produced by BRP for sale in California, that are originally
sold in California to a California resident or subsequently warranty registered to
a California resident. The BRP limited warranty conditions for Sea-Doo personal
watercraft are still applicable to these models with the necessary modifications.

Select emission control parts of your 2005 Sea-Doo 3D RFI personal watercraft
are warranted from the date of delivery to the first retail consumer for a period
of 4 years, or for 250 hours of use, whichever occurs first. However, warranty
coverage based on the hourly period is only permitted for personal watercraft
equipped with the appropriate hour meters or their equivalent. If any emission-
related part on your engine is defective under warranty, the part will be repaired
or replaced by BRP.

110

_____________________

www.SeaDooManuals.net

«
...
109
110
111
112
113
...
»

Summary of Contents for 2005 3D RFI




























































































































Reviews:

No comments

Related manuals for 2005 3D RFI

Brand: TALAMEX Pages: 55

SUN ODYSSEY 41 DS

Brand: Jeanneau Pages: 188

Brand: Boston Whaler Pages: 80

Brand: Westport Pages: 11

Brand: Cobalt Digital Inc Pages: 130

Brand: Scout Boats Pages: 116

Brand: Axopar Pages: 134

Brand: Grady-White Boats Pages: 66

Brand: Grady-White Boats Pages: 76

Brand: Grady-White Boats Pages: 78

Brand: Grady-White Boats Pages: 74

Brand: Grady-White Boats Pages: 76

Brand: Grady-White Boats Pages: 87

Packraft FamilyRaft

Brand: Nortik Pages: 9

Brand: Nortik Pages: 11

Brand: Nortik Pages: 29

Performance H2X

Brand: Baja Pages: 83

Brand: J/Boats Pages: 77

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands