Sea-doo 2001 GTS Operator'S Manual Download Page 1

Page: 1 / 180

Read this guide thoroughly.

It contains important safety information.

Minimum recommended operator’s age: 16 years old.

Keep this Operator’s Guide in the watercraft.

2014

OPERATOR’S

Includes Safety, Watercraft and

Maintenance Information

GUIDE

2014

SERIES

GTS / GTI / GTR / WAKE

FAIT AU / MADE IN CANADA U/M:P.C

219 001 130

OPERATOR’S GUIDE, GTS / GTI / GTR / WAKE SERIES / ENGLISH
GUIDE DU CONDUCTEUR, SÉRIE GTS / GTI / GTR / WAKE / ANGLAIS

®™ AND THE BRP LOGO ARE TRADEMARKS OF BOMBARDIER RECREATIONAL PRODUCTS INC. OR ITS AFFILIATES.

2 1 9 0 0 1 1 3 0

GTS / GTI / GTR / WAKE

WARNING

Disregarding any of the safety precautions and instructions contained in

this Operator’s Guide,

SAFETY DVD

video and on-product safety labels

could cause injury including the possibility of death!

CALIFORNIA PROPOSITION 65 WARNING

WARNING

This product contains or emits chemicals known to the state of California to

cause cancer and birth defects or other reproductive harm.

In Canada, products are distributed by Bombardier Recreational Products Inc.

(BRP).
In USA, products are distributed by BRP US Inc.
Knight’s Spray-Nine

†

is a trademark of Korkay System Ltd.

GTX

†

is a trademark of Castrol Ltd. Used under license.

This is a non-exhaustive list of trademarks that are the property of Bombardier

Recreational Products Inc. or its affiliates:

4-TEC

Rotax

VTS

D.E.S.S.

GTS

XPS

iBR

GTI

130

GTI

iControl

Sea-Doo

GTI

SE 130

Learning Key

Sea-Doo LK

GTI

SE 155

iTC

S³Hull

GTI

Limited 155

WAKE

155

GTR

215

GTS

Rental

O.T.A.S.

T.O.P.S.

smo2014-001 en
®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.
©2013 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.

Summary of Contents for 2001 GTS





















































































































































































Search results

Summary of Contents for 2001 GTS

Reviews:

Sea-doo 2001 GTS, Operator'S Manual, Page: 1 / 180

Search results

Summary of Contents for 2001 GTS

Reviews: