4
！
REMEMBER:
Do not mount directly onto a metal surface or the remote control will not work.
！
REMEMBER:
Provide at least 1-
1/4” (32mm) clearance underneath the mounting surface to allow
adequate reception of the remote control signal. Remote control may not work if clearance is
insufficient.
！
REMEMBER:
Install the foam gasket and ensure proper sealing.
Electrical Wiring
1. Provide DC 12 Volt input power for the spotlight.
2. Protect input power positive (+) terminal with 10 A fuse or circuit breaker.
3. Use 12-gauge power cable for wiring distance not more than 30 ft. (9 m), and use 10-gauge power
cable for longer wiring distance.
！
Use the correct 12V power source - wrong voltage will damage product and may cause safety
hazard.
