9
Troubleshooting
What to do if …
… the spot light does not respond to remote control.
Press and hold button for 2 seconds.
Move to a location that is less than 15M away.
Move to a location that has no obstructing structure between remote control and spot light.
Replace battery for remote control.
Check whether the last digits of serial numbers inside light housing and inside remote control are
identical.
… the light cannot be turned on.
Secure light bulb.
Replace light bulb if necessary.
Check if the 12V powered surface mount wireless remote
’s power connection is in good condition
(spotlight control supplied with the spotlight).
Check if the wireless remote
’s battery is in good condition (battery operated wireless remote
model sold separately).
… the spot mode or flood mode does not function.
Secure and replace light bulb.
… the spot light does not respond to any control.
Check voltage of inboard battery.
Check the fuse or circuit breaker that protects spot light and joystick control panel.
Carefully uninstall the spot light. Examine all the electrical connections.
Check if the 12V powered surface mount wireless remote
’s power connection is in good condition
(spotlight control supplied with the spotlight).
Check if the wireless remote
’s battery is in good condition (battery operated wireless remote
model sold separately).
！
Do NOT replace a blown fuse until the cause of spot light malfunction is identified and resolved.
！
DO NOT replace a blown fuse with a fuse that takes higher current.
… the spot light halt during operation.
Return spot light and control to dealer for further inspection.
… the spot light cannot rotate in certain direction.
Carefully uninstall the spot light and examine all the electrical connections.
Replace control panel.
… the brightness of the light significantly decayed.
Replace light bulb.
For other problems, and when problem is not solved with the above tips
…
Contact Sea-Dog technical service at
. Include a description of the problem,
user contact information, and proof of purchase if requesting warranty service.
Installation work and repairs to electrical components of this product
must
only
be carried out by a suitably
qualified and competent
person in accordance
with current
local and national safety regulations
. Repairs and other work
by unqualified persons could be dangerous. The manufacturer cannot be
held liable for unauthorized work.
