Sea Breeze PAHS127 User Manual Download Page 23

Page: 23 / 26

MAINTENANCE

WARNING

We recommend you follow the cleaning and maintenance operations regularly as indicated in the

instructions. Unplug the unit before performing any cleaning operations to prevent accidents

caused by electrical shock.

AIR FILTER

If the air filter is clogged with dust the air flow volume is reduced.

For this reason, clean the filter regularly.

To remove the air filter, lift up the filter cover and pull the air filter out from the

cover.

Once the filter is dry, hook the filter onto its cover using the fastening hooks on

the inside of the cover. Place the hooks on the front into the holes on the

structure itself and push it back into place.

AIR CONDITIONING UNIT SURFACES

Clean the surfaces of the air conditioning unit with a damp cloth and dry it with a dust cloth.

WARNING:

KEEP AWAY FROM FLAMMABLE FLIUIDS OR SUBSTANCES!

Summary of Contents for PAHS127



























Search results

Summary of Contents for PAHS127

Reviews:

Related manuals for PAHS127

Brands by name

Popular brands

Sea Breeze PAHS127, User Manual

Search results

Summary of Contents for PAHS127

Reviews:

Related manuals for PAHS127

Brands by name

Popular brands