Sea Breeze PAHS127, User Manual

Page: 22 / 26

22
WINDOW KIT INSTALLATION
Open window or sliding door approximately 5 inches (13 cm). Adjust the length of the window kit
to the same length of the window or sliding door. Use
two or three panels if necessary and secure panels
into place by fastening the 3/4” Phillips head screws
into the pre-drilled panel holes.
Alternatively you may need to mark a single panel
and cut it down to properly fit the window opening.
The window kit (three panels) has a maximum length
81 inches.
Place the window kit between the window and the
window frame as shown in the picture to the right.
Close the window onto the window kit to form a tight
seal.
Attach the exhaust duct window kit adapter to the
window kit. Tabs located on the adapter will lock into
place securing the adapter to the window kit.
NOTE:
Using the window kit will cause the window not to be properly closed and locked. Consider taking
additional security measurements.