E-14
Mounting the camera in the Housing
Slide the quick shoe into the correct position. Gently press
the quick shoe forward and turn the lock
6
7
Align the front case with the rear
case and press them together
8
Close the locking latches
Make sure that the O-ring is properly fitted in the O-ring groove before
setting of the rear case.
See:
“Opening and Closing the Housing” (P.E-10)
After the camera is mounted in the housing, make sure to check that all of
the housing's control parts work properly and the camera functions correctly.
CAUTION
CAUTION
If you find the fix screws are too tight, use a coin or similar object to loosen
the screws.
1
Open the locking latches
2
Remove the rear case
3
Set the quick lock to the OPEN position
4
Slide the camera toward you as you remove the front case
Removing the camera from the housing
Before setting the rear case,
put the cameraʼs eyelets in the
positions shown by the arrows.
CAUTION
