SE Electronics DynaCaster DCM 3, User Manual

Page: 5 / 40

5
Technical specifications
DynaCaster DCM 3 DynaCaster DCM 6
Capsule Dynamic
Voice coil
Copper
Magnet Neodymium
Polar Pattern Cardioid
Frequency range 40 Hz - 18 kHz
Sensitivity 2.5 / (-52 dBV) 2.5 / 79 mV/Pa (-52 / -22 dBV)
Powering - +48V Phantom power
Current consumption - 3.1 mA
Electrical impedance 600 Ohms 600 / 135 Ohms
Recommended load impedance > 1k Ohms
Connectivity 3-pin male XLR connector
Dimensions
158 x 86 x 62 mm (L x W x H)
6.22 x 3.39 x 2.44 in. (L x W x H)
Weight 512 g / 18.06 oz. 518 g / 18.27 oz.
Frequency Response Polar Pattern
Support
In case you have any questions about your new sE product, please do not hesitate to contact us directly:
http://www.seelectronics.com/contact-us
In the event that your new sE product is operating improperly, it must be returned to us as the manufacturer
or to a destinated vendor for any service or repair. For the fastest and most direct service, please contact
your dealer first. If authorized service is required, it will be arranged by that dealer:
http://www.seelectronics.com/dealers
If you are experiencing difficulties with support or assistance, please do not hesitate to contact us directly:
http://www.seelectronics.com/contact-us