+44 (0)1543 443060
www.secontrols.com
Please keep these operating instructions for future reference and maintenance.
Subject to technical modifi cations. Diagram is not binding.
Installation Guide
Sliding Bracket - ABU0040235F
1. Sliding Bracket
2. Adjustable Eyebolt
3. Trunnion Bracket
6. Trunnion Bracket
Dovetail sliding bracket kit allows bracket ‘1’ to be secured to the actuator anywhere along the length of
the rack.
Check straight alignment between sliding bracket and eyebolt to ensure correct operation.
Close stroke position is adjusted by use of the threaded 6mm eyebolt if required.
Pivot Bracket - ABU0040235F
4. Front/Rear Pivot Bracket
2. Adjustable Eyebolt
3. Trunnion Bracket
6. Trunnion Bracket
Front or rear pivot bracket kit allows bracket ‘4’ to be secured to the actuator through the holes located
either side of the rack.
Check straight alignment between pivot bracket and eyebolt to ensure correct operation.
Close stroke position is adjusted by use of the threaded 6mm eyebolt if required.
*For master and slave setup please contact SE Controls for guidance.