CONTROL
ELEMENTS:
6
SETUP
,
AND
STARTUP
:
TRANSPORT
AND SETUP
The M-A5 active system is ve
r
y compact and easy to transport
.
The subwoofer must be placed on the
rubber feet before use
.
Please NEVER use the system while it is on a transport trolley!
There is a danger of
uncontrolled movement of the entire system
.
This can lead to accidents and dam
age.
The amplifier cooling
elements are in the back of the subwoofe
r.
When the amplifier is in use
,
please maintain a minimum distance of
50 cm between these cooling elements and other objects
,
walls
,
etc.
,
to permit sufficient he
at exchange.
Please make certain th
a
t the system and all connected source devices
,
mixers
,
CD players
,
etc
.
are properly
connected to one another and to the p
o
wer mains
.
Use only undam
a
ged cables with a sufficient cross-section
and only completely unrolled cable reels
.
Route the cables so as to
a
void tripping hazards (gaffa t
a
pe)
.
The unit
should never be positioned directly
a
t an edge
.
Please also do not position the subwoofer on a table
.
It is ad
-
visable to a
l
ways turn the system on last and off first in order to
a
void loud popping sounds when the connected
devices are turned on and off.
CONNECTION
AND OPERATION
It is possible to set both the overall system volume as well as the volume of the
subwoofer in rel
a
tion to the overall volume
.
The ultim
a
te volume level is then adjusted via the source device
.
The
connections permit both an unbalanced and an unbalanced connection (XLR / jack 6.3 mm) to a source device.
The position of the connectors and control elements of the M-A5 are shown on the following page.
SETUP
The M-A5 all-in-one array system consists of the foll
o
wing three components:
1.
Subwoofer with integr
a
ted electronics for all 3 parts of the
system.
2.
The lower vertical array column with 8 x 3’’ speakers and 2
multipin connectors
,
one each on the top and bottom.
3.
The upper vertical array column with 8 x 3’’ speakers
, the
tweeter and a multipin connector on the bottom.
Once the subwoofer is positioned in the room th
a
t is to be filled
with sound
,
the l
o
wer vertical array column is plugged onto the
subwoofe
r. F
our stur
d
y steel pins help ensure th
a
t the multipin
connectors of both speakers m
a
te perfectl y
.
N
o
w the upper
vertical array column is simply plugged onto the l
o
wer column
according to the same principle
.
07
06
CONNECTION
1
4
3
2
5
6
7
8
