Version 5
page 22
※
For a detailed description of the display threshold and image range, refer to the 'Signal Forming Setting'
section.
At the bottom of the main screen, there are five icons shown below. The function, definition and description of
each icon are as below.
Icon
Function
Description
Battery
Status Check
Displays the current battery charge level. Fully charged, the SonaVu
™
operates for approximately four hours.
Battery Capacity 2 ~ 9 %
Battery Capacity 10 ~ 29 %
Battery Capacity 30 ~ 72 %
Battery Capacity 73 ~ 97 %
Battery Capacity 98 ~ 100 % (Full Charged)
If the battery is below 1%, this warning
message will appear.
When the battery level reaches more than 15%
the icon will change and the SonaVu
™
can be
used again.
MEMS Status
Check
*Only Visible
In Audible
Mode
**May also
appear in the
upper right
corner,
depending on
the firmware
version
Press to check the operation of the 112 MEMS sensors mounted on
the front of SonaVu
™
.
(Only visible in audible mode)
