Summit Dental Systems
Toll Free: (800) 275-3368
www.summitdental.com
Page 9 of 24
Post Leveling
1.
Install the post with the bushing at the top; be certain that the post bottoms in the
post socket ad that the hole in the side of the post is facing toward the head of the
chair. Look at the post socket and locate the eight leveling screws (see figure above).
2.
Place a 6 to 12 inch level in the upright post (a magnetic level works best). While
holding the post as upright as possible, tighten the upper four leveling screws until
they just contact the post on all four sides. Position the level so that it is in line with
the front to back level screws.
3.
Level the post front to back. Now move the level 90 degrees and repeat the above
procedure with the remaining screws for leveling side to side. Re-check level in both
directions, and then fully tighten all leveling screws.
4.
To ensure that the unit is absolutely level, it will be necessary to level the base
unit on the post once the post has been leveled.