For questions or help with the installation, please call SDHQ Offroad @ 480-633-2929
Mon.
–Fri. 8:00am–5:30pm and Sat. 8:00am–3:30pm Arizona Time. www.sdhqoffroad.com
Page
4
of
7
***READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION! ***
Installation Instructions:
1. Remove the Grille
- Using a 10mm socket and ratchet, remove the (4) screws on top of the
grille. There is also (2) clips that will need to be removed with a flat head screw driver.
2.
The grille is now ready to be removed. There are (2) clips on each side of the grille underneath
each head light and (3) clips along the bottom of the grille. Start on the driver side and grab
underneath the grille below the headlight and pull out to separate the grille from the body. The
grille will need to be pushed down towards the ground to release the second clip underneath
the headlight. Work your way along the bottom towards the passenger side and release the
bottom (3) clips. Release the last (2) clips on the passenger side underneath the headlight.
