CHAPTER 2. USING THE SD LIPIDOCARE PROFESSIONAL ANAL
YZER
1.
Changing the batteries
Before using the Analyzer for the first time, perform the following steps:
1)
Ensure the analyzer is switched off, and turn it over.
2)
Open the battery compartment lid by slightly pressing the tab toward the center of
the analyzer.
3)
Lift the lid upward to remove it from the analyzer.
4)
Insert four batteries into the compartment. Please note the orientation of the"+"
(battery head) and “-“ terminals (flat end). Use only alkaline manganese batteries (1.5
V, AAA).
5)
Close the battery compartment lid.
6)
Turn the analyzer on to test the functionality of the new batteries.
7)
Check to ensure that the display is functioning correctly to prevent misinterpretations
due to defective display elements.
NOTE:
•
After inserting or replacing the batteries, confirm that the time and date are set correctly.
If they are incorrect, reset the analyzer before using.
•
Always replace all four batteries at the same time. Do not use rechargeable batteries.
- 11 -
Summary of Contents for 02LA10G
Page 1: ......
