background image

The ScyTek Vision Guard 8000 is a combination vehicle security and remote starting system featuring a

built-in "ScyNet Network Port" that allows direct connection of optional accessory modules and a PC

interface offering expanded system operation.   With proper installation this system will provide superior

protection and performance for many years to come. 
The VisionGuard 8000’s built-in remote start feature is designed to offer maximum convenience by remote

starting your vehicle’s engine, turning on the heater/air conditioner, and then running for a pre-determined

time to provide a comfortable environment once you enter your vehicle.
To ensure the safety and security of the system while it is remote started, the VisionGuard 8000 employs

several safeguards.  In the event the alarm is triggered while the engine is remotely running, the remote

start will immediately shutdown to prevent unauthorized users from attempting to drive the vehicle.  The

system is equipped with a hood pin input to prevent access  to the engine compartment while the vehicle

is remotely running.  The Valet Mode prevents the remote start feature from operating in the event the

vehicle is to be serviced.  Finally, the brake pedal also acts as a safety by shutting down the remote start

when pressed.

System Contents:

Main Unit with built-in ScyNet Network Interface Port

Two-Way Full Color Picture Ready LCD Remote Transmitter

Camera Remote Transmitter/Receiver

One-Way 5-Button Random Code Remote Transmitter

High Output 6-tone Siren

Dual Stage Shock Sensor

Status LED

Coded Emergency Override / Valet Switch

Optional ScyNet Network Interface Accessories:

ScyNet Network Interface Software

Options and Convenience Features

*

This ScyTek system includes several optional inputs and outputs allowing the creation of a completely

personalized security and convenience system by offering many optional features such as:

*May require additional parts and/or labor, see store for details.

VisionGuard 8000  -  Page 1

· Second Car Operation

· Keyless Entry

· Two Stage Door Unlocking

· Starter Defeat

· Horn Honk

· Illuminated Entry

· Turbo Timer

· Remote Window Control

· Power Trunk / Hatch Release

· Glass Breakage Sensor

· Radar Sensor

· Remote Head Lamp Control

· Back-up Battery Siren

· Camera Flash Stobe Module

About  Your  System

Some of the features described in this manual may require additional parts and/or labor, and may not be included

as part of the standard installation of this unit.  Additionally, many features of this security system have

selectable options that must be activated or programmed during the system’s installation.  These items will be

identified in the following sections.  Please discuss these features and any questions you may have regarding the

installation of this product with Your Authorized Dealer.

Summary of Contents for VISIONGUARD 8000





































Reviews: