background image

after the ignition key is turned on.
Override Code Set. Changes the Emergency Override Code for a higher level of security.  

5.

Ignition Door Unlocking.

Selects whether or not the system automatically unlocks the doors when

the ignition is turned off. The Ignition Door Locking feature may be programmed to unlock all doors or

the driver’s door only.  If driver’s door only is selected, the optional Passenger Unlock wire must be

connected. (

See Two Stage Door Lock Diagrams)  

6.

Door Unlock Pulse.

Selects between one pulse or two pulse operation for the door unlock output.

Many new import vehicles’ factory door locking systems require two pulses on the proper wire to unlock

the doors.  These systems can be interfaced directly without the use of relays or any additional circuitry

by programming the system for double unlock pulse. 

7.

Door Lock Pulse Length.

Selects between a 1-second and a 3-second output for door locking and

unlocking.  Program to 3 seconds for vehicles equipped with vacuum door locking systems.

8.

Passive Door Locking.

Selects whether or not the system will automatically lock the doors during

Passive Arming and Auto Rearming mode. 

9.

Passive Arming Entry Delay.

When selected, the siren will chirp for 10 seconds before sounding if

a door is opened.  The system may be disarmed by simply turning on the ignition when programmed

for this feature.

Galaxy 3000 Plus  -  Page 17

Branch Feature

Button 1 (default)

Button 2

Button 3

1. Arm Mode

Manual Arming 

Passive Arming

Hands Free Mode

2. Auto Rearming Mode

Disabled 

Enabled

Hands Free Mode

3. Arming Chirps

Normal

Silent

4. Ignition Door Locking

On

Off

Set Override Code  

5. Ignition Door Unlocking

Unlock All

Unlock Driver Only

Off

6. Door Unlock Pulse

Single

Double

7. Door Lock Pulse Length 

1 second

3 seconds

8. Passive Door Locking

Disabled

Enabled

9. Passive Arming Entry Delay 

Disabled

Enabled

10. Ignore Open Door Report

Off

Ignore

11. Horn Chirps w/ Arm&Disarm

Normal

Horn Chirps 

Anti-Carjack w/ Valet Reset 

Disabled 

Enabled 

12. Horn Honk Output

Flashing

Continuous

Anti-Carjack w/ Hands-Free

Disabled

No Anti-Carjacking

Enabled

13. Aux 2 Activate on Arm

Off

On

14. Aux 1 Mode

Pulsed

Timed

Latched

15. Aux 2 Mode

Pulsed

Timed

Latched

16. Aux 3 Mode

Pulsed

Timed

Latched

17. Disarm with Aux 1

Disabled

Enabled

18. Start in Valet Mode

Enabled

Disabled

19. Remote Start Program

Learn RPM

Gas Engine

Diesel Engine

20. Automatic Start Mode

Disabled

Auto Low Temp

Auto Low Voltage

21. Special Transmitter Program

not used

Learn FM Remote

Learn Hands Free TX

Summary of Contents for Galaxy 3000Plus Series





























Reviews: