Scytek electronic Galaxy 3000Plus Series, Product Manual

Page: 19 / 28

Galaxy 3000 Plus - Page 15
Jumper Selections
Carefully separate the top and bottom halves of the main unit case. Once the cover is removed, the polarity
jumpers will be visible next to the parking light and dome light relays. Set the jumpers for the correct
polarity output as described below, then reassembly the main unit case.
Parking Light Output. Selects the polarity (+/-) for the output of the on-board Parking Light relay.
Left Pin + Center Pin = positive
Right Pin + Center Pin = negative
Dome Light Output. Selects the polarity (+/-) for the output of the on-board Illuminated Entry relay.
Left Pin + Center Pin = positive
Right Pin + Center Pin = negative
Jumper S Settings
default settings shown