Scytek electronic A1.1 SERIES Product Manual Download Page 31 | Manualshive

Page: 31 / 37

Scytek electronic A1.1 SERIES Product Manual Download Page 31

G5.2W, G2.2W, A4.2W, A1.2W - Page 27

28.

Extended Parking Lights.

When selected, the parking lights will remain ON for 30 seconds after

disarming the system.

29.

Warn-Away Pager Report.

When Enabled, Warn-Away report will be sent to the pager. If Disabled

no Warn-Away report will be sent to the pager.

30.

Anti-Carjack Type.

Selects one of three modes for Anti-Carjacking: Active, Passive, or Full-Time.

Active. When selected, while igniton is on pressing Button 4 parking light will flash once and anti-carjack
feature will be engage. To disengage the Anti-Carjacking, while ignition is on press button 4 parking light
will flash twice.
Passive. When selected, the Anti-Carjacking feature will activate whenever a door is opened while the
ignition is on. To disengage the Anti-Carjacking, while ignition is on press and release the valet switch
parking light will flash twice.
Full-Time. When selected, the Anti-Carjacking feature will automatically activate each time the ignition is
turned on parking light will flash once , or while ignition is on and a door is opened parking light will flash
once. To disengage the Anti-Carjacking, while ignition is on press and release the valet switch parking
light will flash twice.

Anti-Carjack engaged: Once engaged after 90 seconds the siren will chirp and horn will honk for 15
seconds, then starter intrrupt will activate, siren, horn and parking lights will turn on for 5 minutes, after
5 minutes siren and horn will turn off. starter interrupt will stay active until anti-carjack disengages.

31.

Anti-Carjack Mode.

Enables Anti-Carjacking protection.

32.

Data Port Trigger Inputs

. Enable

33.

System Mode:

Selects between G5/A4 Series or G2/A1 Series.

Factory Defualt does not affect this setting.

34.

Pulse Ignition with Unlock.

When enabled, Ignition output will pulse before door unlock command.

35. When enabled doors unlock before start.

36.

Alternate Manual Transmission Start Mode:

If set, the vehicle start mode is enabled

upon engaing the hand brake.

(manual transmission systems only).

«
...
29
30
31
32
33
...
»

Summary of Contents for A1.1 SERIES






































Reviews:

No comments