manualshive.com logo in svg

Scytek electronic A1.1 SERIES, Product Manual, Page: 12 / 37

Share
Download
Scytek electronic A1.1 SERIES Product Manual Download Page 12

Page 8 -  G5.2W, G2.2W, A4.2W, A1.2W

AUTO 

display starter autostart enabled features.

1. Press and hold Button 5 until the display shows AUTO.

·The transmitter will beep three times.

2. Release Button 5.

· The LCD panel will display what starter auto start features are enabled.

SPCL 

Program the pager time of a day clock from the internal Remote Starter clock, the remoter starter

sends its time to the pager.

1. Press and hold Button 5 until the display shows SPCL.

·The transmitter will beep four times.

2. Release Button 5.

· The pager will display the new time. 

SSCL 

Program the remote starter time of a day clock from the pagerS

1. Press and hold Button 5 until the display shows SPCL.

·The transmitter will beep five times.

2. Release Button 5.

· The pager will display confirmation that the starter clock is sync.

C St

Auto Start Cold Temperature Activation Mode.

1. Press and hold Button 5 until the display shows 

C St

.

· The transmitter will beep 6 times.

2. Release Button 5.

· The transmitter will beep once.
· The LCD panel will show Auto Start Cold Temperature setting.

3. Press and hold Button 5 until the display shows 

CON

.

4. Release Button 5.

· The transmitter will beep once.
· The LCD panel will show "

ON

" indicating that Auto Start Cold Temperature Activation

Mode is enabled.

H St

Auto Start Hot Temperature Activation Mode.

1. Press and hold Button 5 until the display shows 

H St

.

· The transmitter will beep 7 times.

2. Release Button 5.

· The transmitter will beep once.
· The LCD panel will show Auto Start Hot Temperature setting.

3. Press and hold Button 5 until the display shows 

CON

.

4. Release Button 5.

· The transmitter will beep once.
· The LCD panel will show "

ON

" indicating that Auto Start Hot Temperature Activation

Mode is enabled

A St

Auto Start Daily Activation Mode.

1. Press and hold Button 5 until the display shows 

A St

.

· The transmitter will beep 8 times.

2. Release Button 5.

· The transmitter will beep once.
· The LCD panel will show Daily Auto Start time setting.

3. Press and hold Button 5 until the display shows 

CON

.

4. Release Button 5.

· The transmitter will beep once.
· The LCD panel will show "

ON

" indicating that Daily Auto Start Activation

Mode is enabled

SND

sound function selects the transmitter's confirmation mode - Tone or Vibration mode. 

Set the transmitter confirmation tones ON or OFF:

1. Press and hold Button 5 until the display shows SND.

· The transmitter will beep 9 times.

2. Release Button 5.

· The transmitter will beep once.
· The LCD transmitter will beep 5 times and display “on” if the sounds are enabled or vibrate and

display "off" for the Remote to vibrate.

Summary of Contents for A1.1 SERIES






































Reviews:

No comments