SCT 4015 User Manual Download Page 6

SCT PERFORMANCE, LLC. 

User’s Manual 

1.2 

Device Firmware & Tune Revision Updates

 

From  time  to  time,  you  may  wish  to  update  your  device  to  the  latest  version  of  firmware  or  tune  revision.   Make 
sure you have returned your vehicle back to stock before updating your unit.  

NOTE: If viewing this document online you can click on the following link to download the SCT Device Updater:

 

SCT 

Device Updater

 

1.3  About your SCT Device 

Available Gasoline Tunes: 93, 91, 87 octane and economy as applicable. 
Available Diesel Tunes: Performance, Street, Towing.  

Note:

 Not all options are available for all vehicles. 

iTSX VIN locks (marries) to a single vehicle. You cannot use the device to tune a new or different vehicle, until

 

you have returned the original vehicle back to stock, which will unlock the device. You can only change vehicles

 

5 times before the unit is permanently locked.  To reset the Changes or Unlock device you will need to contact

 

SCT.  Service charges do apply.

Standard pre-programmed tuning files are designed for vehicles with minor performance modifications such as;

 

cold air kits, high-flow exhaust systems, and other basic modifications. Vehicles that have aftermarket

 

superchargers or turbochargers will require custom tuning, which can be purchased only through authorized SCT

 

Custom Tuning Dealers. 

If you later add a blower, turbo or nitrous to your vehicle or add a more ‘wild’ naturally aspirated combination of

 

parts, you will need to obtain a custom tune from an SCT dealer.  The iTSX programmer is flexible enough so

 

that your original investment will not be lost – it can be loaded with a custom tune from the SCT dealer.

Read your vehicle’s warranty carefully before installing or using this Product.  You are solely responsible for

 

determining whether use or installation of this Product will negate or diminish any applicable warranty coverage.

 

Under no circumstances will the Seller be liable for the voidance of all or any part of the Buyer’s vehicle

 

warranty.  Rather, the Buyer assumes all risk and responsibility if an automotive manufacturer and/or dealer

 

voids the Buyer’s vehicle warranty in whole or in part due to use or installation of this product.

The stock file is stored during initial programming.  The stock file stays on the programmer until returned to

 

stock.  You should always return your vehicle back to stock before taking your vehicle in to any auto service

 

facility or before updating your device. 

The iTSX is NOT legal for sale or use in California on pollution controlled motor vehicles 

Summary of Contents for 4015


















Reviews: