TB-9089
Page 3 of 3
© 2018 DESCO INDUSTRIES INC
Employee Owned
SCS
- 926 JR Industrial Drive, Sanford, NC 27332
East: (919) 718-0000 | West: (909) 627-9634 • Website:
StaticControl.com
12. Set the mat test switch to FAIL. The monitor's red
mat LED should illuminate, and its audible alarm
should sound.
13. Set the mat test switch to PASS. The monitor's
green mat LED should illuminate.
Specifications
Operating Temperature 50 to 95°F (10 to 35°C)
Environmental
Requirements
Indoor use only at altitudes
less than 6500 ft. (2 km)
Maximum relative humidity
of 80% up to 85°F (30°C)
decreasing linearly to 50% @
85°F (30°C)
Dimensions
3.8" L x 2.4" W x .9" H
(97 mm x 61 mm x 23 mm)
Weight
0.2 lbs. (0.1 kg)
Country of Origin
United States of America
The SCS WSMONITOR2 Plus Verification Tester may
also be used with the following discontinued items:
• WSMONITOR1
• WSMONITOR1-230VAC
• WSMONITOR2
• WSMONITOR2-230VAC
• WSMONITOR3
• WSMONITOR3-230VAC
Limited Warranty, Warranty Exclusions, Limit
of Liability and RMA Request Instructions
See the SCS Warranty -
StaticControl.com/Limited-Warranty.aspx
