manualshive.com logo in svg

SCS PTC-IIIusb, User Manual

Share
Download
SCS PTC-IIIusb User Manual Download Page 54

5 PTC-Firmware 

 

41

The PACTOR duplex is activated with the new command 

PDuplex

 (refer to chapter 

6.69

, page 

75

). The automatism works with the following relatively simple algorithm: 

1.

 

If the PTC-IIIusb is the information sending station ( ISS), that means controls the 
keys, the PTC-IIIusb automatically executes a CHANGEOVER, if his transmission 
buffer is empty (that means no data to be sent are available). 

2.

 

If the PTC-IIIusb is the information receiving station ( IRS), the PTC-IIIusb 
automatically executes a BREAKIN, if the transmission buffer is not empty, that 
means that data for transmission are available and the IRS state exists for at least 12 
seconds. 

This automatism causes a variety of conclusions during practical operation that have to be 
mentioned, especially if the PTC-IIIusb with activated PACTOR Duplex has to work 
together with a 

conventional

 PACTOR system. 

The general usage of the PACTOR Duplex mode is not recommended at the moment, 
because especially 

old

 PACTOR mailbox systems have problems with the 

unnecessarily

 

automatically executed changeover of the PDuplex-PTC. The conventional operation 
control in the personal 

Chat-QSO

 should only be switched to PACTOR Duplex mode, if 

the QSO partner is familiar with what happens and will not be confused by the change-
overs of the PACTOR Duplex-PTC appearing accidentally. 
The following distinctiveness exists for the PTC-IIIusb itself when switched to PACTOR 
Duplex: 

1.

 

The CHANGEOVER bell is generally deactivated. 

2.

 

Open files for the PTC internal mailbox will not be closed by a CHANGEOVER any 
more. 

3.

 

Mailbox access of users with PACTOR Duplex are executed correctly (the command 
interpretor will not be closed as usual by a CHANGEOVER, but generally by a 

Carriage Return

). 

5.12.1

 

Application for PACTOR Duplex 

1.

 

PDuplex can be used excellently to make mailbox programs for PR working with the 
WA8DED hostmode (

DPBox

, 

DieBox

, 

GP

, 

WinGT

, etc). also usable for PACTOR. 

The terminal- and mailbox program does not notice on the WA8DED hostmode side 
any difference between a PACTOR– or PR-link, if PDuplex is activated. No 
transmission control character has to be send by the PC. 

The great advantage of these technique: 
The PR program used by a mailbox is compatible to 

all

 PACTOR users, 

independently if they use PACTOR Duplex or not. ( It also doesn’t matter if a user 
accesses to the mailbox with PACTOR-1 or PACTOR-II). 

2.

 

In combination with binary data transparency binary files can now be transmitted 
directly - e.g. in the Autobin mode via PACTOR – without the detour using 7PLUS or 
other coding mechanisms. If a file shall be transmitted to a friend using the PTC-
IIIusb too, both PTC-IIIusb are switched to PACTOR Duplex. Using a WA8DED 

Summary of Contents for PTC-IIIusb


























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands