SCS PACTOR III, Installation Manual

Page: 46 / 57

3. Installation
40
3.5.1 Connection PTC – ICOM
Most ICOM transceivers that use 8 pin DIN plug (ACC) can be connected this way:
Signal PTC Color ICOM 8 pin
GND PIN 2 white PIN 2
PTT PIN 3 yellow PIN 3
AF-OUT PIN 1 violet PIN 4
AF-IN PIN 4 green PIN 5
POWER PIN 5 blue PIN 7
This cable is available completely assembled. Refer to
chapter 5 on page 49 .
Table 3: ICOM 8 pin
The smaller ICOM transceivers (e.g. IC-706) often use a 13 pin DIN plug for ACC:
Signal PTC Color ICOM 13 pin
GND PIN 2 white PIN 2
PTT PIN 3 yellow PIN 3
AF-OUT PIN 1 violet PIN 11
AF-IN PIN 4 green PIN 12
POWER PIN 5 blue PIN 8
This cable is available completely assembled. Refer to
chapter 5 on page 49 .
Table 4: ICOM 13 pin
Some ICOM marine radios (e.g. IC-M801, M710-GMDSS) use a 9 pin SUB-D connector:
Signal PTC Color ICOM 9 pin
GND PIN 2 white PIN 2, 4, 9
PTT PIN 3 yellow PIN 5
AF-OUT PIN 1 violet PIN 1
AF-IN PIN 4 green PIN 3
POWER PIN 5 blue PIN 7
This cable is available completely assembled. Refer to
chapter 5 on page 49 .
Table 5: ICOM 9 pin