TB-9023
Page 2 of 16
© 2017 DESCO INDUSTRIES, INC.
Employee Owned
SCS
- 926 JR Industrial Drive, Sanford, NC 27332 • (919) 718-0000 • Website:
StaticControl.com
The EM Eye and its accessories are available as the
following item numbers:
Item
Description
CTM048-21
EM Eye - ESD Event Meter
CTC021
ESD Sensor
CTC022
ESD Sensor, 20KV
CTC028
EMF Sensor
CTC029
RF Sensor
CTC113-6FT
Remote ESD Sensor
CTC115-6FT
Remote ESD Sensor, High Temp
CTS001
Replacement Antenna
770756
Power Adapter, 100-240VAC Input,
5VDC 1.0A Output, All Plugs
Packaging
CTM048-21
EM Eye - ESD Event Meter
1 EM Eye Meter
1 ESD Sensor
1 Antenna
1 MicroSD Memory Card, 4GB
1 Power Adapter, 5VDC, with interchangeable plugs
(North America, UK/Asia, Europe)
1 CTC113 Remote Antenna
1 RF Cable, 6 feet
1 Carrying Case
1 Certificate of Calibration
Precautions
• Do not drop the meter. This may damage the device
and will void the warranty.
• Do not discharge directly into the antenna metals as
it may damage the input sensors and will void the
warranty.
• Be cautious in the placement of antenna and the
module heads; align the parts while assembling.
• Do not use sharp objects to touch the screen.
• Do not use a wrench or pliers to screw or unscrew
the antenna. Use your bare hands.
• Do not remove the microSD card while the power is
on. Turn off the meter before removing the microSD
card.
• Do not remove the sensor heads while the power
is on. Turn off the meter before removing and
replacing the heads.
Attaching the Sensor Heads
Keep in mind the following when using the modular
sensor heads.
BEFORE CONNECTING TO AN INPUT SOURCE,
TOUCH THE OUTSIDE SURFACE OF THE EM EYE
METER INPUT CONNECTOR. THIS WILL HELP
PREVENT ESD SHOCK TO THE METER.
1. The power must be turned off when changing the
sensor heads.
2. Make sure to gently plug or unplug EM Eye Meter
and the sensor heads.
3. Plug or unplug the sensor heads by firmly gripping
them. Then fit the sensor over the EM Eye unit. Do
not grab the antenna for plugging and unplugging
the sensor heads.
4. If the antenna is separated from the sensor head,
reattach it when the sensor head is securely in
place.
Attaching the Antenna
In order to avoid damaging the EM Eye Meter,
installation and replacement of the antenna must be
done with great care. An excessive amount of force
or improper installation may permanently damage the
meter.
Attach the antenna to the input connector by simply
screwing it in by hand.
DO NOT OVERTIGHTEN THE CONNECTION. Screw
in the antenna firmly but gently. Do not use any tools
other than your hand to attach and detach the antenna.
