![background image](http://html.mh-extra.com/html/scs-sentinel/xo-403/xo-403_installation-and-operation-manual_1219978006.webp)
J1
White wires of
the keys reader
J2
Black and red
wires of the keys
reader
J3
A : Doo
B : Doorphone –
C : 0V
D : 12V DC
6
cabling
diagram
xo
403
+
-
D
C
B
A
12V
0V
J1
J2
J3
12V
230V
• Portier vidéo ou audio
• Alimentation 12V DC
7
programming
Use the remote control to program the system.
Programming of the ID keys
1) Tape
0000
then
#
there is a BIP sound.
2) Tape
*62#
, there is a bip sound.
3) Keep each ID keys one by one , and pass them in front of the key reader (There is a bip sound when you pass the key).
4) To finish the programming, take an ID keys already programmed and pass it in front of the keys reader.
5) The programming is finished.
Deprogramming ID keys
1) Tape
0000
then
#
, there is a bip sound.
2) Tape
*3#
, there is a bip sound.
3) Keep each ID keys one by one , and pass them in front of the key reader (There is a bip sound when you pass the key).
4) To finish the deprogramming, take an ID keys already deprogrammed and pass it in front of the keys reader.
5) The deprogramming is finished.
Cancellation of the ID keys
( In case of loss)
1) Tape
0000
then
#
, there is a bip sound.
2) Tape
*4444#
, after 3 seconds, there is a bip sound, all ID keys are cancelled.