13
the base plate and not with the battery module. Once
positioned on the base plate, the battery module will read
the information from the latter. Likewise, when a battery
module is replaced, its reprogramming is not required, as
the necessary information will be automatically provided
by the base plate.
To write information onto the base plate, please follow the
instructions below.
PROGRAMMING THE SCREENLINE REMOTE CONTROL
(OPTION)
The battery module is equipped as standard with a
radio receiver for remote control. A 99-channel radio
transmitting board is used for the remote control. The
radio receiver housed in the battery module can memorize
up to 26 channels; it can thus receive an equal number of
addresses from one or several remote controls.
Memorizing a channel
1. Detach the battery module from its
base plate;
2. Select the required channel on the
remote control display by pressing the
+/- buttons;
3. Using a thin tool, such as the end of
a paperclip, press the programming
button on the battery module (see
image opposite) for 3 seconds, until
the yellow LED on the up arrow turns on
and immediately off;
4. Within 20 seconds hook the battery
module onto the base plate to be
memorized;
5. The yellow LED will remain steadily
on and, within 10 seconds, it will
be necessary to send the association command by
pressing the up and down push buttons simultaneously
on the remote control, until the green LED on the battery
module flashes quickly.
Deleting a channel
1. Detach the battery module from its base plate;
2. Call up the channel to be deleted on the remote control
display by pressing the +/- push buttons;
Programming
button