11
BATTERY MODULE SL2776
The device is provided with two sensitive areas, identified
by its arrow-shaped push buttons, which are designed to
perform all functions. There are no mechanical buttons.
IMPORTANT: for correct operation, the contact area
between finger and sensitive area must be sufficiently
wide to induce reaction.
RAISING/LOWERING
To raise or lower the blind:
• Turn on the battery module by
tapping one of the arrows; the
latter’s turning on confirms
that the battery module has
been activated;
• Touch the arrow corresponding
to the desired operation
direction for more than two
seconds: the touched arrow
shows a darker colour, which
becomes lighter again after
two seconds.
The blind will move until it reaches the upper or lower end
stop, without the need to keep the arrow pressed. To stop
the movement at any time, simply tap any arrow once.
In some cases, it is possible to notice an initial “jerky”
movement of the blind, which is however to be considered
normal and acceptable.
SLAT TILTING FOR VENETIAN BLINDS
To tilt the slats:
• Turn on the battery module by tapping one of the
arrows; the latter’s turning on confirms that the battery
module has been activated;
• Briefly tap (for less than two seconds) the arrow
corresponding to the desired operation direction, until
reaching the desired tilting angle.
N.B.: when partially raised, Venetian blinds may not be
able to be tilted open, depending on their size and state of
charge of the battery. In cases like this, it is necessary to
raise the blind again until reaching maximum speed and
then lower the blind until the desired angle is achieved.
GB
Activation
sensitive
areas with
LED
Micro USB