manualshive.com logo in svg

Screen Innovations Zen Box, Owner'S Manual, Page: 12 / 15

Share
Download
Screen Innovations Zen Box Owner'S Manual Download Page 12

Install the tensioners onto the mounts making sure that they are threaded out as much as possible 
so that there will be thread available to tension the cables. Cut the cables such that they are the 
same length so that they will just extend to the bottom of the hole in the tensioner. 

3

Cut Here

INSTALLING THE TENSIONERS AND 

CUTTING CABLES -

Insert the cable into the tensioner all the way to the bottom of the tensioner and  secure with the 
set screws. Then tension the cable by tightening the nut for wall mount brackets or the tensioner 
itself for floor mount. Finally lock in the tensioners with the locknut. 

Make sure that the cables 

are mounted level and plumb in all directions. As a final check make sure that the left and right 
cables are the same distance apart from top to bottom within 1/4’’.

4

PL

UMB

PL

UMB

Insert cable and bottom out 

into the tensioners

4A

Secure with 

set screws

4B

Turn bottom nut to 

tension cable

4C

TENSIONING THE GUIDE CABLES - 

NOTE: Cables may lose tension over time. In that case simply 
tighten the tensioners and lock in with the lock nut.

Zen Box - Cable - Installing the tensioners and cutting cables

Zen Box - Cable - Tensioning the guide cables

Pg 19

Pg 20

Summary of Contents for Zen Box
















Reviews:

No comments