INSTALLATION
- 120 VAC - RTS (375 / 475 SERIES)
4. Remove both end caps
3. Measure bracket to bracket width and verify it matches the ordered width. Adjust accordingly.
Motor End cap
1/8” hex tool
Idler End cap
Pg 5
Installation - Nano Roll - 120 VAC - RTS - 375 / 475
Brackets must be level before the
shade is installed!
5. Push power cable into pre-wire hole
6. Align and fasten motor side.
Pg 6
INSTALLATION
- 120 VAC - RTS (375 / 475 SERIES)
Installation - Nano Roll - 120 VAC - RTS - 375 / 475
There will be an audible click.
Note:
Motor cable is not plenum
rated. Terminate accordingly.
