SPACER BLOCKS AND LEVELING SHIMS (OPTIONAL)
Spacer Blocks
- used to clear an obstruction in the fabric path.
Leveling Shims
- used if the window frame is out of level.
Connect to shade brackets before installation
Note: do not use more than 2 leveling shims per bracket.
Connect spacer blocks to shade brackets before installation
Note: Do not use more than 4 Spacer blocks per bracket.
Spacer Blocks and Leveling Shims (Optional)
Pg 3
Pg 4
INSTALLATION
- 120 VAC - RTS (375 / 475 SERIES)
Installation - Nano Roll - 120 VAC - RTS - 375 / 475
2. Install wall bracket/end cap assembly with the supplied screws
1. If mounting to a wall, remove the ceiling flange from motor and idler brackets
Before installing the shades, verify whether the shade was ordered as standard roll or reverse roll. Though
illustrations in this manual show standard roll shades, the installation for reverse roll shades is the same.
Motor Side
Motor Side
for Ceiling Mount
Motor side
Idler side
for Wall
Mount
