Page 4
2.4 Camera Modes
The different modes are accessed by sliding the
power switch to the different positions marked on
the camera:
●OFF Mode
Turns the camera off. The camera will still consume
a small amount of power while in OFF mode. It is
recommended to remove the batteries if the camera
will not be used for a long period of time.
●TEST/SETUP Mode
Customize the camera settings, or play back
pictures and videos the camera has taken on the
LCD display.
●ON Mode [ Hunting Mode ]
Camera will take pictures or video when motion is
detected and/or at specific time intervals, according
to the programmed settings. After switching the
camera to the ON position, the motion indicator
LED (red) will blink for about 10 seconds and then
turn off. This preset time allows you to adjust the
cameras position if needed, before the camera
becomes active.
2.5 Trigger Modes
There are 3 different trigger modes for the camera:
PIR Trigger/Sensitivity, Time Lapse, and a
