Page 16
step of one second. The default value
is 10 seconds. Press
LEFT
and
RIGHT
to decrease or increase the
value by 1 second.
Default:10 sec
Time
Lapse
Time lapse means the camera can
capture images or videos at a preset
time interval regardless of whether
motions are detected. The default
parameter is Off, which means the
timer function is disabled. Changing
this parameter to a non-zero value
turns on the Time Lapse mode, and
camera will take photos at given time
interval.
Please note that if the PIR
Trigger is set to Off, then the
Time Lapse can’t be set to Off
.
Default:off
PIR
Trigger
Choose sensitivity of the PIR sensor.
This parameter defines the sensitivity
of the PIR. There are four sensitivity
parameters: High, Normal, Low and
Off. The default value is “Normal”.
The higher degree indicates that the
Camera is more easily to be triggered
by motion, taking more pictures or
recording
more
videos.
It
is
recommended to use high sensitivity
degree in room or environment with
little interference, and to use lower
