Dahl Docking Manual Scout Mobility
5 of 12
4101976 Revision A Sept. 2018
The X10 chassis has dedicated holes in the chassis where the Dahl Docking plate can be mounted on.
1. Unlock (1) and remove (2) the PM cover. Remove the knurl bolts (3) and flip open the interface.
Support the interface secure when working on the wheelchair.
Remove the main fuse, remove the battery cover and battery strap. Disconnect all battery harnesses
and remove the batteries.
2. Put the 5 special Dahl nuts into the dedicated mounting holes from the inside of the battery box.
The pictures below show the holes to be used for mounting the Locking plate on FWD, RWD and
MWD.
Front Wheel Drive mounting positions
