Step 3
- press “Next” to start the installation process, that takes only few seconds. When the installation is finished you
need to Restart the computer (Figure 5).
Figure 3
Figure 4
Figure 5
Step 4
- once the computer has fully rebooted, plug in the KS-60 to the USB port. A pop up window will inform you that
the device driver software is going to be installed (Figure 6). When the installation is completed another pop
up window informs you that the device driver software has been installed successfully (Figure 7). The KS-60 is
now ready to use.
Figure 6
Figure 7
KS-60 Basic User Manual
Scout
