Scout Guard SG560K-8M User Manual Download Page 6

Page: 6 / 18

SG560K-8M

Cautions

2 Cautions

★

The working voltage of the camera is 6V. The camera is supplied by four AA batteries.

★

Please install batteries according to shown polarity.

★

Please unlock the write-protect before inserting the SD-card.

★

Please insert the SD-card when the power switch is at

OFF

position before testing the

camera. The camera has no internal memory for saving images or videos. If no SD-card is

inserted, the camera will shut down automatically after a continuous indication sound.

★

Please do not insert or take out the SD-card when the power switch is at

position.

★

It is recommended to format the SD-card by the camera when used at the first time.

★

In the

TEST

mode, the camera will shut down automatically after 3 minutes if no operation is

done. Please turn on the power again if you want to continue to work with the control.

Page

Summary of Contents for SG560K-8M



















Search results

Summary of Contents for SG560K-8M

Reviews:

Related manuals for SG560K-8M

Brands by name

Popular brands

Scout Guard SG560K-8M, User Manual

Search results

Summary of Contents for SG560K-8M

Reviews:

Related manuals for SG560K-8M

Brands by name

Popular brands