Scout Boats 245 Dorado, Owner'S Manual, Page: 84 / 116

84
12.4 Bilge
To keep the bilge clean and fresh, it is recommended that you
use a commercial bilge cleaner on a regular basis. Follow the
directions carefully. All exposed pumps and metal components
in the bilge should be sprayed periodically with a protector to
reduce the corrosive effects of the high humidity always pres-
ent in these areas.
Periodically check the bilge pumps for proper operation and
clean debris from the strainers and float switches. Inspect all
hoses, clamps and thru-hulls for leaks and tightness on a regular
basis and operate all thru hull valves at least once a month to
keep them operating properly.
Frequently test the automatic switches for the bilge pumps for
proper operation. This is accomplished by lifting the float
switch until the pump is activated. You can also use a garden
hose to flood the bilge until the water level is high enough to
activate the pump.
12.5 Drainage System
It is essential that the following items be done periodically to
maintain proper drainage of your boat:
• Clean the cockpit drains with a hose to remove debris that
can block water drainage.
• Clean the hardtop or T-top leg drain holes. This is
especially important just before winter lay-up.
• Flush all gravity drains with freshwater to keep them clean
and free flowing.
• Operate the thru-hull valves once a month and service as
required.
Note: All drains and pumps must be properly winterized
before winter lay-up.