6
Mounting Instructions
The Scotty electric line puller mounts on the Scotty No. 1023 mounting bracket
supplied with the line puller. This bracket can be bolted directly to your gunnel or
on top of an alternative mount (for additional mounting options see page 7). Line
pullers can be mounted on either side of the boat, on the stern or on either corner.
They will work in any location but you should be mindful of where you will be coil-
ing the trap line and how you will lift a full trap over the gunnel of the boat.
You may be handling heavy traps and long lengths of rope, ensure your mounting
location is convenient and safe for these operations. Do not mount the line puller
where you have to reach or lean a long way to lift a heavy trap over the gunnel.
Due to the heavy stresses placed on the boat gunnel by the leverage of the traps
on the line puller arm, we recommend that a wood or metal backing plate always
be installed on the underside of the mounting surface. This spreads the load and
reduces damage to the boat in the event of a snagged trap.
Care and Maintenance
Your Scotty line puller is constructed of corrosion resistant materials. The following
regular maintenance checks should be performed:
1. Routinely check the stainless steel fastenings with a screwdriver to see that
they are snug and secure.
2. Check the electrical plug connectors for corrosion and clean off any corrosion
found. Failure to clean corrosion may cause electrical arcing and shorting
which may be a potential fire hazard.
3. Do not use any lubricants. Lubricants will attack and damage the plastic
components.
4. Do not expose the line puller to ultraviolet light for extended periods of time.
